6600-728 Spa Circuit Board for Sundance® Spas

Home > Circuit Boards > Sundance® Spas Circuit Boards, 850, 880 Series. 1997-Present >

MSRP $753.88

Product Code: 6600-728

Qty:

Description

6600-728, Sundance, Jacuzzi Spas Circuit Board. this is the latest revision board that takes the place of the following boards:
6600-180 (see notes on this board below!), 6600-098 and 6600-161 Circuit Boards. Please note it is VERY IMPORTANT that you verify what you have especially if you had the 6600-180 board that was used on many models that this board is not compatable to.

The boards come with the same mounting footprint as older circuit boards to simplify replacement.

Click here for Installation Instructions (pdf)

Used on these Sundance Spas:

2005-4/2009 with these boards with 2-One Speed Jet Pumps(Make sure that is what your spa has, there is some cross over in 2005): 6600-098, 6600-161, 6600-180: Altamar, Cameo, Capri, Marin, Optima, Majesta
This board is for 2 Single Speed pumps, if your spa has a board listed such as the 6600-098, 6600-161 or 6600-180 and you have 1 pump that is 2 speed this IS NOT the correct board for you! Please contact us prior to purchase to verify what you have.

CANNOT be used on:

Pre-2005 850 Models using 6600-028, 6600-056, 6600-092 (The Replacement Board is the 6600-730)
Spas using 6600-164, 6600-176 (The Replacement Board is the 6600-390)
Maxxus Spas using 6600-155, 6600-160, 6600-398 (The Replacement Board is the 6600-392)
Spas that used a 6600-164, 6600-176 (The Replacement Board is the 6600-390)
6600-180 Board that was used to replace any of the following boards: 6600-028, 6600-056, 6600-092 when on spas with One 2-Speed Jet Pump and One Single Speed Jet Pump.(The Replacement Board for these is the 6600-730)

Used on these Jacuzzi Spas:

2006-2009 J-400 Series models with Two Single Speed Jet Pumps. This board is for 2 Single Speed pumps, if your spa has a board listed such as the 6600-098, 6600-161 or 6600-180 and you have 1 pump that is 2 speed this IS NOT the correct board for you! Please contact us prior to purchase to verify what you have.
J-300 series LCD models with Two Single Speed Jet Pumps

CANNOT be used on:

Any Spas that used: 6600-028, 6600-056, 6600-092 (The Replacement Board is the 6600-730)
Spas using 6600-164, 6600-176 (The Replacement Board is the 6600-390)
6600-180 Board that was used to replace any of the following boards: 6600-028, 6600-056, 6600-092 when on spas with One 2-Speed Jet Pump and One Single Speed Jet Pump (The Replacement Board is the 6600-730)

This Circuit Board is returnable only for warranty. Please See Return Policy: http://www.spapartsfinder.com/Returns.asp

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Circuit Boards > Sundance® Spas Circuit Boards, 850, 880 Series. 1997-Present

	6600-880 Sundance 780 Series Control Panel $467.40
	6600-871, Sundance Spas Inground 850 Control Panel, 40ft cable harness 1 Pump, 2000+ $958.00
	6540-260, Sundance Jet back Adapter, 0.5" Spigot x 0.75" Barb $4.95
	6600-854 Sundance® Spas Control Panel 880 Series $565.00
	6500-352, Sundance® Spas Pump. Used on 2009+ 880 Series. 2.5 Hp, 240 Volt, 56 Frame, 1 Speed. $586.00
	6600-726 Sundance, Sweetwater, Jacuzzi Spas Circuit Board. $487.00
	6560-139 Footwell Light Assembly 2013+ $69.95
	6600-392 Circuit Board for Sundance® Spas with Permaclear $577.50
	Sundance Spa Pillow Attachment Nut (Qty 2) 6570-234 $8.67

Join our mailing list!