6600-730 Spa Circuit Board for Sundance® Spas

Home > Circuit Boards > Sundance® Spas Circuit Boards, 850, 880 Series. 1997-Present >

MSRP $777.00

Product Code: 6600-730

Qty:

Description

6600-730, Sundance, Jacuzzi Spas Circuit Board. This is the latest revision board that takes the place of the following boards:
6600-180 (see notes on this board below!), 6600-028, 6600-056 and 6600-092 Circuit Boards. Please note it is VERY IMPORTANT that you verify what you have especially if you had the 6600-180 board that was used on many models that this board is not compatable to.

The boards come with the same mounting footprint as older circuit boards to simplify replacement.

Click here for Installation Instructions (pdf)

Used on these Sundance Spas:

1997-2005 850 Spa Models that used the 6600-028, 6600-056 and 6600-092 Boards with One 2-Speed Jet Pump and One Single Speed Jet Pump (make sure that is what your spa has, there is some cross over in 2005): Altamar, Cameo, Capri, Marin, Optima, Majesta

CANNOT be used on:

850 Models using 6600-098, 6600-161(The Replacement Board is the 6600-728)
Spas using 6600-164, 6600-176 (The Replacement Board is the 6600-390)
Maxxus Spas using 6600-155, 6600-160, 6600-398 (The Replacement Board is the 6600-392)
Spas that used a 6600-164, 6600-176 (The Replacement Board is the 6600-390)
6600-180 Board that was used to replace any of the following boards: 6600-098, 6600-161, when on spas with Two Single Speed Jet Pumps.(The Replacement Board for these is the 6600-728)

Used on these Jacuzzi Brand Spas:

Spas that used the following Circuit Boards with One 2-Speed Jet Pump and One Single Speed Jet Pump: 6600-028, 6600-056 and 6600-092 Circuit Boards. 6600-180 (see notes on this board below!),
Please note it is VERY IMPORTANT that you verify what you have especially if you had the 6600-180 board that was used on many models that this board is not compatible to.

CANNOT be used on:

Spas that used a 6600-098, 6600-161(The Replacement Board is the 6600-728)
Spas that used a 6600-155, 6600-160, 6600-398 (The Replacement Board is the 6600-392)
Spas that used 6600-164, 6600-176 (The Replacement Board is the 6600-390)
6600-180 Board that was used to replace any of the following boards: 6600-098, 6600-161, when on spas with Two Single Speed Jet Pumps.(The Replacement Board for these is the 6600-728)

This Circuit Board is returnable only for warranty. Please See Return Policy: http://www.spapartsfinder.com/Returns.asp

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Circuit Boards > Sundance® Spas Circuit Boards, 850, 880 Series. 1997-Present

	91041622 Aqua-Flo Wet End 2.0 HP 56 Frame FMXP2 $74.85
	115/120v Laing Circulation Pump, 3/4" Barb - 6500-460 $363.00
	6560-035 Sundance Spas, Heater Manifold, 2" , Slip Union $4.95
	6760-115 Sundance Spas, Buss Fuse 2 Amp Slow-Blow MD2A $17.20
	6600-892 Sundance Spa Side Control, 800, 850 Series, 2 Pump System with Single Cable Harness. For spas without a Remote (Secondary) top side panel. 03/1993-1999 $418.00
	Spa Filter Replacement for Sundance® Spas Microclean Filter 6540-502 Four Pack $79.52
	6600-068, Sundance Hi-Limit Sensor $67.44
	6660-100 Sundance Spas, Fuse 250 Volt, 8 Amp $3.49
	6541-064, AquaTerrace 3-Way Waterfall Valve $96.87

Join our mailing list!