6000-125NA OEM Sundance® Spas Circulation Pump, 3/4" Barb, 230 Volt

Home > Pumps, Motors and Components > Sundance® Spas Circulation Pumps >

6000-125NA Sundance® Spas Circulation Pump, 3/4" Barb, 230 Volt

Alternative Views:

MSRP $396.00

Product Code: 6000-125NA

Qty:

Description

6000-125NA OEM Grundfos Circulation Pump for Sundance and Jacuzzi Spas

Newest Pump from Sundance, Jacuzzi (the Laing Pump model is discontinued by Sundance and Jacuzzi)

This is a drop-in replacement with 3/4" barbed fittings to fit your Sundance or Jacuzzi spa. The pump placement may have to be moved and installed elsewhere in the cabinet due to a difference in the design of the Grundfos over the Laing. It comes with instructions for installation.

Grundfos Pump made for Sundance, Jacuzzi. Grundfos part number: 98653522 P1
230 Volt (220-240 Volt) replaces the following pumps: 6000-125, 6000-125RK, 6500-035, SM-909-NHW-18 3/4, SM-909-NH-18 and more (see below)
3/4 inch barbed fittings
*Comes with Metal Base and a Metal Housing.* This pump must use a bonding wire to the system as an external ground.

This Pump is compatable with the following Sundance® Spas:

Mid 2009+ 680 Burlington, Hartford, and Hawthorne equipped with a Circ Pump
Mid 2009+ 780 Hamilton, Chelsee, Certa and Camden
2008+ 680 Burlington, Hartford, and Hawthorne equipped with a circ pump
2007 680 Hartford and Hawthorne equipped with a circ pump
2007+ 780 Hamilton, Chelsee, Certa and Camden
2006 Palermo, Bahia and Cayman
All 2005 780 Series spas
All 2003-2004 Sweetwater models (Except Lagunas)
All 1997+ North American/Export 800, 850 Series PermaClear Systems (Except 2005+ 880 Series Models)

This Pump is used on the following Jacuzzi® Spas:

All 2002+ Jacuzzi J-300 series wtih 230v, 50/60 Hz Circulation Pump (6000-125). Note: Use the connector from the old circulation pump because the new pump does not come with a connector.

Replaces the following circ pump models:

SM-909-NH-14 3/4" Barb 230 Volt
SM-909-NHW-14 3/4" Barb 230 Volt
SM-909-NH-18 3/4" Barb 230 Volt
SM-909-NHW-18 3/4" Barb 230 Volt
SM-909-NH-26 3/4" Barb 230 Volt
SM-909-NHW-26 3/4" Barb 230 Volt
SM-959-NHW-26 3/4" Barb 230 Volt
SM-1212-NH-26 3/4" Barb 230 Volt
E10-NSHNSW-20
Sundance number: 6000-125
Sundance number: 6000-125RK
Sundance number: 6500-035

PLEASE NOTE: This pump is a 230/240 Volt Pump with white, black and green wires. The white and black are the two hot leads and the green is the Ground. Do not confuse this pump for a 120 Volt version!

This Pump can be returned for warranty only! Please Read our Return Policy

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pumps, Motors and Components > Sundance® Spas Circulation Pumps

	Sundance Pillow Mounting Bracket for 2003-2006 Speaker Pillows - 6455-500 $12.16
	6541-223 Sundance Spas Diverter Valve Cap (Gray), All 1998 Models $7.95
	6541-220 Sundance Spas Diverter Wall Fitting (Gray), All 1995-2003 Models $14.95
	6600-392 Circuit Board for Sundance® Spas with Permaclear $577.50
	Sundance Spa Pillow Attachment Nut (Qty 2) 6570-234 $8.67
	6600-148 Sundance Spa Inground Control Panel, 800/850 Series, 40ft cable harness, 2-Pump, For Inground Spas 1993-1999 $887.00
	6660-192 Sundance Spas, Terminal Block, 2-Position $39.00
	6760-115 Sundance Spas, Buss Fuse 2 Amp Slow-Blow MD2A $17.20
	6600-068, Sundance Hi-Limit Sensor $67.44

Join our mailing list!

6000-125NA OEM Grundfos Circulation Pump for Sundance and Jacuzzi Spas

This Pump is compatable with the following Sundance® Spas:

This Pump is used on the following Jacuzzi® Spas:

Replaces the following circ pump models: