• 2017+ 680 1-pump Prado and Prado 5
  

• 2006+ 680 1-Pump: Denali® and Tacoma®

• 2003-2005 Del Sol Redondo and Hermosa

• 2000-2002 Sweetwater Board: Aruba, Bali, and Cyprus

• Replaces 6600-082, 2000-2001 Sweetwater Board: 2000-2001 Aruba, Bali, and Cyprus and 6600-089 Circuit Board.

• Replaces LX-10 Series 3-60-009

• Replaces 6600-289, 6600-042 with eprom logic chip 5.+
  

Jacuzzi® Spas Circuit Board for:

• J-210

• J-220

Sundance® Spas used the same board on different series but sometimes would change the eprom on the board to function on a different system, but not the part number on the board. So the part number on the board may be incorrect. This is essential in getting the correct board is to look at the eprom. This is a small 1/4 inch by 1 inch (approx) on the board itself with a white sticker that started with REV. This is crucial to ordering the correct board, see info below in making the correct choice, if unsure then send a picture of the board with the eprom number visible. Also if your year and model is not listed below it is probably not for your spa. If you have the wrong eprom you can order the correct one on our site.

Comes with a latest eprom logic chip. Software revision's in the past: 5.0 5.03, 5.52, 5.54, 5.57 No Circulation Pump. If your circuit board has a Software Chip that begins with a 5, then this is the correct series board. Sundance® Spas has revised this chip several times, we send you the board with the current chip. If you have an older board with a Circulation pump, then you need a board with a Series Chip that starts with a 3 such as the 6600-286

To help clarify, your system runs its heat and filtration and jets from the main spa pump not a small circulation pump (see 6000-125 for picture of a circulation pump)

Note: 6600-722, 6600-724, 6600-042, 6600-044, 6600-289 are the same boards with different eprom chips.