For spa models that use this pump see the "Applications" tab above.
The Pump is complete with a US Motors and the Sundance/Jacuzzi Factory OEM wet end. The only difference between the Factory Pump and ours is that ours comes with the original welded bracket on the motor instead of the bracket mount currently used by Sundance. Our pump replaces the original found in your spa that had the mounting bracket welded to it.
This can be used for other pumps by Sundance by simply adjusting the position of the wet end by loosening the 4 bolts (this is a thru bolt motor) and turning the wet end to the position of the original pump and then retightening the 4 bolts. We send the pump in the 6500-293 position which is in the 9:00 position.Comes complete as pictured with the motor and wet end/pump
housing includes Impeller 6500-309, Seal 6500-805, Oring 6500-290, Front
Pump Housing 6500-288 and Rear Pump Housing 6500-311 and Screws (8)
6570-070. Does not come with the power cord or Hose Barb 6540-171*
Please Note The wiring diagram for your motor is on the ID plate of the Motor. It may vary from your original wiring on your original spa motor.
This pump can be used for the following pump numbers by rotating the wet end to match the position of the original pump.