Description
6600-722 (6600-289), SUNDANCE® Spas, JACUZZI® Spas, Sweetwater Spas Spas Circuit Board
Used on these Sundance® Spas Models without a Circulation Pump:
-
2017+ 680 1-pump Prado and Prado 5
-
2006+ 680 1-Pump: Denali® and Tacoma®
-
2003-2005 Del Sol Redondo and Hermosa
-
2000-2002 Sweetwater Board: Aruba, Bali, and Cyprus
-
Replaces 6600-082, 2000-2001 Sweetwater Board: 2000-2001 Aruba, Bali, and Cyprus and 6600-089 Circuit Board.
-
Replaces LX-10 Series 3-60-009
-
Replaces 6600-289, 6600-042 with eprom logic chip 5.+
Jacuzzi® Spas Circuit Board for:
Sundance®
Spas used the same board on different series but sometimes would change
the eprom on the board to function on a different system, but not the
part number on the board. So the part number on the board may be
incorrect. This is essential in getting the correct board is to look at
the eprom. This is a small 1/4 inch by 1 inch (approx) on the board
itself with a white sticker that started with REV. This is crucial to
ordering the correct board, see info below in making the correct choice,
if unsure then send a picture of the board with the eprom number
visible. Also if your year and model is not listed below it is probably
not for your spa. If you have the wrong eprom you can order the correct
one on our site.
Comes
with a latest eprom logic chip. Software revision's in the past: 5.0
5.03, 5.52, 5.54, 5.57 No Circulation Pump. If your circuit board has a
Software Chip that begins with a 5, then this is the correct series
board. Sundance® Spas has revised this chip several times, we send you
the board with the current chip. If you have an older board with a
Circulation pump, then you need a board with a Series Chip that starts
with a 3 such as the 6600-286
To help clarify, your system runs its heat and filtration and jets from the main spa pump not a small circulation pump (see 6000-125 for picture of a circulation pump)
Note: 6600-722, 6600-724, 6600-042, 6600-044, 6600-289 are the same boards with different eprom chips.
