220v Sundance Spas Corona Discharge Ozone - 6473-150
Product Code: 6473-150
Our Price: $187.00
Description
Sundance® Spas and Jacuzzi® Spas Advanced Plasma Gap Ozone
The
Advanced Plasma Gap ozone replaces the 6473-124 and 6473-125 Ozone used
from 2005+. Also replaces all previous 240 Volt Ozones used.
The
power cord comes with the J&J plug that Sundance and Jacuzzi started
using in 2005. If you wish to use it on earlier models that used the
square Molex plug, then you can order the 6000-953 adapter cord or
hardwire (take the end off and direct wire) to the system. See Info
below on Wire Color Code.
120 Volt Systems: This
Unit has the ability to be wired 120 or 240 Volt and can replace any
120 Volt Ozones (6473-123 or 6472-624)that Sundance or Jacuzzi used. You
would need to remove the J&J plug on the end of the power cord and
hardwire (take the end off and direct wire) to the system.
The Advanced Plasma Gap Ozone:
Is made with an inert metal cell, which means no metals used in the cell so there will be no failure from corrosion. Older systems were susceptable to corrosion due to nitirc acid that is produced.
The new Corona Discharge System uses ceramic technology.
Better technology gives you a lower cost for opertion.
Smaller profile for easier fit in to any size spa. 3.25 inch by 5 inch by 2.25 inch
Ozone output rated at 125 MG
Can also be hardwired if fitting that comes with it does not match up to your connector.
Correspond color code as follows:
Black wire (old unit) to Blue wire (new unit)
White wire (old unit) to Brown wire (new unit)
Green to GreenWe recommend the JED 103 Ozone for higher output of Ozone