google-site-verification: google62e582af54a5aae5.html
The E10-NSHNDNN2W-02 replaces all Laing Pumps with a 3/4 inch barbed fitting, 230/240 Volt. (see below)
The Laing E10 EcoCircPump is used on many spa/hot tubs and can be used to replace most brands of circulation pumps with 3/4 inch barbed fittings.
This pump uses 40% less energy and runs 40% cooler than previous models. It also includes a smart "chip" in the motor that gradually increases rpm at power up that minimizes impeller cavitation and ensures "air lock" free startups. This cycle will repeat up to 10 times until "prime" is established. If prime is not established, the pump will shut down and require manual restart (turn power to spa off and back on).
This pump replaces old part numbers used by Sundance, Jacuzzi and other Manufacturers: 6000-125, 6500-035, SM-909-NHW-18 3/4,SM-909-NH-18, E10-NSHNDNN2W-01 (see below for more complete list). No longer comes with the metal base that was used on Sundance, Jacuzzi Spas.
This Pump is used on the following SundanceŽ Spas:
The Pump is used on the following JacuzziŽ Spas:
All 2002+ J-340 & J-345 Models
All 2002+ J-330 & J-335 Models
All 2002+ J-350 & J-355 Models
All 2002+ J-360 & J-365 Models
All 2002+ J-370 & J-375 Models
All 2002+ J-380 & J-385 Models
2002-2003 J-320 & J-325 Models
Mid year 2007-2012 J-270 & J-280 Models if equipped with a circulation pump
Does NOT work on units that are 120/240v convertible regardless of how the hot tub is wired.
PLEASE NOTE: This pump is a 230/240 Volt Pump, the wires that come with the pump is white, black and green, the white and black are the 2 hot leads with the green as a Ground. The pump comes with no connectors. Do not confuse this pump for a 120 Volt version!